PCIE Interface Laser and Galvo Controller LMCPCIE Series
PCIE Interface Laser and Galvo Controller for Laser Marking, Etching, Engraving...
PCI-E interface laser and galvo controller connects the motherboard of an industrial PC directly, which greatly enhances the stability of the connection. This controller is widely equipped with laser equipment with galvo (Marking, engraving, welding, cutting, etching...) for automated production lines.
Product Pictures
FAQs
Different connection and power supply methods: PCI-Express and USB
Different Input signal: PCE 6 input/ USB 12 input
Different Output signal: PCE 2 Output/ USB 8 Output
In 2020, JCZ officially stopped the upgrade of EZCAD2 and PCI controllers. We will continue to produce them.
Specifications
| Model | LMCPICE-FIBER | LMCPICE-DIGIT |
| Compalitable Software | EZCAD2.14.11 | |
| Comunication | PCI-E | |
| Compalitable Laser | Fiber | CO2, UV, YAG, Green... |
| Note: Lasers with some brands or model may need special signals, a manual is needed to confirm the right controller. |
||
| Compatible Galvo | With XY2-100 Protocol | |
| Extending Axis | 1 Axis Control (Pul/Dir Signals) | |
| LaserErr Signal | Yes | |
| Remark Signal | Yes | |
| Encoder Signals | One | |
| Power Supply | 5V from PC | |
| I/O | 6 General TTL input signals,2 General TTL Outputs | 10 General TTL input signals,8 General TTL Outputs |
| Dimension | ||
| Typical Application | 2D Laser Marking | |
| Marking on The Fly | ||
| Rotary Laser Marking | ||
| Laser Welding with Galvo | ||
| Laser Cutting with Galvo | ||
| Laser Cleaning with Galvo | ||
| other laser processing with Galvo. | ||
Product Dimension
2D Drawing
2D Drawing
